Recommended Suppliersmore
2,2-Dimethylpentanoic acid
CAS No.: 1185-39-3
Synonyms:
Formula: C7H14O2
Exact Mass: 130.09900
Molecular Weight: 130.18500
PSA: 37.30000
LogP: 1.89730
Reference Price: $3,165/kg Inquiry Now
2,2-Dimethylpentanoic acid 1185-39-3 MSDS
  2,2-Dimethylvaleric Acid      Revision number: 5    
  SAFETY DATA SHEET

Section 1. IDENTIFICATION
  Product name:        2,2-Dimethylvaleric Acid    
    
  Revision number:        5    

Section 2. HAZARDS IDENTIFICATION
  GHS classification
  PHYSICAL HAZARDS
    Category 1
  Corrosive to metals
  HEALTH HAZARDS
    Category 1C
  Skin corrosion/irritation
  Serious eye damage/eye irritation        Category 1    
    Not classified
  ENVIRONMENTAL HAZARDS
  GHS label elements, including precautionary statements
  Pictograms or hazard symbols
  Signal word        Danger    
  Hazard statements        May be corrosive to metals    
    Causes severe skin burns and eye damage
  Precautionary statements:
  [Prevention]        Keep only in original container.    
    Do not breathe dust/fume/gas/mist/vapours/spray.
    Wash hands thoroughly after handling.
    Wear protective gloves/eye protection/face protection.
  [Response]        IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for    
    breathing.
    IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
    if present and easy to do. Continue rinsing.
    IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
    skin with water/shower.
    Wash contaminated clothing before reuse.
    Immediately call a POISON CENTER or doctor/physician.
    Absorb spillage to prevent material damage.
  [Storage]        Store locked up.    
  [Disposal]        Dispose of contents/container through a waste management company authorized by    
    the local government.
  2,2-Dimethylvaleric Acid

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Components:        2,2-Dimethylvaleric Acid    
  Percent:        >95.0%(GC)(T)    
  CAS Number:        1185-39-3    
  Synonyms:        2,2-Dimethylpentanoic Acid    
  Chemical Formula:        C7H14O2    

Section 4. FIRST AID MEASURES
    Remove victim to fresh air and keep at rest in a position comfortable for breathing.
  Inhalation:
    Immediately call a POISON CENTER or doctor/physician.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. Immediately call a POISON CENTER or doctor/physician.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing.Immediately call a POISON CENTER or
    doctor/physician.
  Ingestion:        Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT    
    induce vomiting.
    A rescuer should wear personal protective equipment, such as rubber gloves and air-
  Protection of first-aiders:
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, carbon dioxide.    
  media:
  Unsuitable extinguishing Water (It may scatter and spread fire.)
  media:
  Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Remove movable
    containers if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions,        Use extra personal protective equipment (self-contained breathing apparatus). Keep    
  protective equipment and people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non-
  emergency procedures: involved personnel should be controlled around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
  containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
  up: material should be promptly disposed of, in accordance with appropriate laws and
    regulations.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent generation of vapour or mist. Wash hands and face thoroughly after
    handling.
    Use a closed system if possible. Use a ventilation, local exhaust if vapour or aerosol
    will be generated.
  Advice on safe handling:        Avoid contact with skin, eyes and clothing.    
    Use corrosive resistant equipment.
  Conditions for safe storage, including any
  incompatibilities
    Keep container tightly closed. Store in a cool and dark place.
  Storage conditions:
    Store locked up.
    Store away from incompatible materials such as oxidizing agents.
  2,2-Dimethylvaleric Acid

Section 7. HANDLING AND STORAGE
  Packaging material:        Comply with laws. Keep only in original container.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust. Also install safety shower and eye bath.    
  Personal protective equipment
  Respiratory protection: Half or full facepiece respirator, self-contained breathing apparatus(SCBA), supplied
    air respirator, etc. Use respirators approved under appropriate government standards
    and follow local and national regulations.
  Hand protection:        Impervious gloves.    
  Eye protection:        Safety goggles. A face-shield, if the situation requires.    
  Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Liquid    
  Form:        Clear    
  Colour:        Colorless - Pale yellow    
  Odour:        No data available    
  pH: No data available
  Melting point/freezing point:No data available
  Boiling point/range:        110°C/2.7kPa    
  Flash point:        No data available    
  Flammability or explosive
  limits:
    No data available
  Lower:
  Upper:        No data available    
    0.92
  Relative density:
  Solubility(ies):
  [Water]        No data available    
  [Other solvents]        No data available    

Section 10. STABILITY AND REACTIVITY
    Stable under proper conditions.
  Chemical stability:
  Possibility of hazardous No special reactivity has been reported.
  reactions:
  Incompatible materials: Oxidizing agents
  Hazardous decomposition Carbon monoxide, Carbon dioxide
  products:

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        ipr-mus LD50:900 mg/kg    
    ivn-mus LD50:740 mg/kg
  Skin corrosion/irritation: No data available
    No data available
  Serious eye
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
  NTP =        No data available    
  Reproductive toxicity:        No data available    
  RTECS Number:        YV6487500    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
  Fish:        No data available    
    No data available
  Crustacea:
  Algae:        No data available    
  2,2-Dimethylvaleric Acid

Section 12. ECOLOGICAL INFORMATION
  Persistence / degradability: No data available
  Bioaccumulative        No data available    
  potential(BCF):
  Mobility in soil
  Log Pow:        No data available    
    No data available
  Soil adsorption (Koc):
  Henry's Law        No data available    
  constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
    incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
    disposing of the substance.

Section 14. TRANSPORT INFORMATION
  Hazards Class:        8: Corrosive.    
    3265
  UN-No:
  Proper shipping name:        Corrosive liquid, acidic, organic, n.o.s.    
    III
  Packing group:

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
  and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
    loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220