YanCheng LongShen Chemical Co....Purity: 98%Lead Time: 14 Day
Sanmenxia Aoke Chemical Indust...Purity: 98%Lead Time: 15 Day
Jiangsu Dacheng Pharmaceutical...Purity: 99%Lead Time: 7 Day
liao ning ku de yi yao ke ji y...Purity: 99%Lead Time: 14 Day
Yancheng Creator Chemical Co.,...Purity: 98%Lead Time: 14 Day
|Name:||1-Bromodecane 98% Material Safety Data Sheet|
|Synonym:||Decylbromide; n-Decyl bromide; 1-Decyl bromid|
Synonym:Decylbromide; n-Decyl bromide; 1-Decyl bromid
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: None Listed.
Section 3 - HAZARDS IDENTIFICATION
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
May cause eye irritation.
May cause skin irritation.
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
No information found.
Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid immediately.
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.
Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 112-29-8: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Wear appropriate protective gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Color: Colorless Liquid
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 238 deg C @ 760.00mmHg
Freezing/Melting Point: -29.6 deg C
Autoignition Temperature: Not available.
Flash Point: 94 deg C ( 201.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Solubility in water: miscible with most common organic solven
Specific Gravity/Density: 1.0660g/cm3
Molecular Formula: C10H21Br
Molecular Weight: 221.18
Section 10 - STABILITY AND REACTIVITY
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
CAS# 112-29-8: HD6850000 LD50/LC50:
CAS# 112-29-8: Inhalation, mouse: LC50 = 4200 mg/m3/2H.
1-Bromodecane - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
Not regulated as a hazardous material.
Not regulated as a hazardous material.
Shipping Name: Not regulated.
Section 15 - REGULATORY INFORMATION
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
WGK (Water Danger/Protection)
CAS# 112-29-8: No information available.
CAS# 112-29-8 is listed on Canada's DSL List.
CAS# 112-29-8 is not listed on Canada's Ingredient Disclosure List.
CAS# 112-29-8 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION