|Name:||Dibutyl sebacate 93% Material Safety Data Sheet|
|Synonym:||Decanedioic acid, dibutyl ester; Dibutyl sebacate; Di-n-butyl sebacate|
Synonym:Decanedioic acid, dibutyl ester; Dibutyl sebacate; Di-n-butyl sebacate
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: None Listed.
Section 3 - HAZARDS IDENTIFICATION
Potential Health Effects
May cause eye irritation.
May cause skin irritation.
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. Low hazard for usual industrial handling.
May cause respiratory tract irritation. Low hazard for usual industrial handling.
No information found.
Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse.
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out with water. Get medical aid if irritation or symptoms occur.
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool.
Cool containers with flooding quantities of water until well after fire is out. Use water spray, dry chemical, carbon dioxide, or appropriate foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.
Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. No special precautions indicated.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 109-43-3: Russia: 10 mg/m3 TWA CAS# 7732-18-5: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Wear appropriate protective gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Color: clear faint yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 344 deg C
Freezing/Melting Point: -12 deg C
Autoignition Temperature: Not available.
Flash Point: 167 deg C ( 332.60 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Solubility in water: Insoluble.
Specific Gravity/Density: .9400g/cm3
Molecular Formula: C18H34O4
Molecular Weight: 314.46
Section 10 - STABILITY AND REACTIVITY
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported
Section 11 - TOXICOLOGICAL INFORMATION
CAS# 109-43-3: VS1150000 CAS# 7732-18-5: ZC0110000 LD50/LC50:
CAS# 109-43-3: Oral, mouse: LD50 = 19500 mg/kg; Oral, rat: LD50 = 14870 mg/kg.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Di-n-butyl sebacate - Not listed by ACGIH, IARC, or NTP.
Water - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Section 15 - REGULATORY INFORMATION
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
WGK (Water Danger/Protection)
CAS# 109-43-3: 0
CAS# 7732-18-5: No information available.
CAS# 109-43-3 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 109-43-3 is not listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
CAS# 109-43-3 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION