Jiangsu Yonghua Fine Chemical ...Purity: 100%Lead Time: 1 Day
nan jing hua xue shi ji gu fen...Purity: 98%Lead Time: 7 Day
Chongqing Sipunasi Technology...Purity: 99%Lead Time: 7 Day
JIANG SU LIAN RUN CHEMICAL CO....Purity: 99.8%Lead Time: 1 Day
Lianyungang Huayijia Chemical ...Purity: 98%Lead Time: 14 Day
|Name:||N-Methylmorpholine Material Safety Data Sheet|
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 11 20/21/22 34
Section 3 - HAZARDS IDENTIFICATION
Highly flammable. Harmful by inhalation, in contact with skin and if swallowed. Causes burns.
Potential Health Effects
Causes moderate eye irritation. May cause eye burns. May cause conjunctivitis.
Causes skin irritation. May be absorbed through the skin in harmful amounts. May cause skin burns.
Causes gastrointestinal irritation with nausea, vomiting and diarrhea. May be harmful if swallowed.
Causes respiratory tract irritation. Irritation may lead to chemical pneumonitis and pulmonary edema.
Prolonged or repeated skin contact may cause defatting and dermatitis.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Discard contaminated clothing in a manner which limits further exposure. Destroy contaminated shoes.
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Vapors can travel to a source of ignition and flash back. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Flammable Liquid.
Can release vapors that form explosive mixtures at temperatures above the flashpoint. Use water spray to keep fire-exposed containers cool.
Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Cool containers with flooding quantities of water until well after fire is out.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Use water spray to dilute spill to a non-flammable mixture. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Scoop up with a nonsparking tool, then place into a suitable container for disposal. Remove all sources of ignition.
Absorb spill using an absorbent, non-combustible material such as earth, sand, or vermiculite. Do not use combustible materials such as sawdust. Provide ventilation.
Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Follow all MSDS and label precautions even after container is emptied because they may contain product residues. Use spark-proof tools and explosion proof equipment. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Do not ingest or inhale. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Wear appropriate protective gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Odor: strong odor - ammonia-like
pH: 10.6 (50g/L water)
Vapor Pressure: 5 mm Hg @ 20C
Viscosity: 0.9 mPa s 20 C
Boiling Point: 239 deg F
Freezing/Melting Point: -87 deg F
Autoignition Temperature: 329 deg F ( 165.00 deg C)
Flash Point: 75 deg F ( 23.89 deg C)
Explosion Limits, lower: 2.2
Explosion Limits, upper: 11.8
Decomposition Temperature: Not available.
Solubility in water: Soluble in water.
Specific Gravity/Density: 0.9 (water=1)
Molecular Formula: C5H11NO
Molecular Weight: 101.15
Section 10 - STABILITY AND REACTIVITY
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Incompatibilities with Other Materials:
Acids, acid chlorides, acid anhydrides, carbon dioxide, strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
CAS# 109-02-4: QE5775000 LD50/LC50:
CAS# 109-02-4: Draize test, rabbit, eye: 920 ug Severe; Draize test, rabbit, eye: 20 mg/24H Mild; Inhalation, mouse: LC50 = 25200 mg/m3/2H; Oral, mouse: LD50 = 1970 mg/kg; Oral, rat: LD50 = 1960 mg/kg; Skin, rabbit: LD50 = 1350 uL/kg; Skin, rat: LD50 = 1820 mg/kg.
N-Methylmorpholine - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Other No information available.
Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.
Section 14 - TRANSPORT INFORMATION
No information available.
No information available.
No information available.
Section 15 - REGULATORY INFORMATION
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
R 11 Highly flammable.
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 34 Causes burns.
S 16 Keep away from sources of ignition - No
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
WGK (Water Danger/Protection)
CAS# 109-02-4: 1
United Kingdom Occupational Exposure Limits
United Kingdom Maximum Exposure Limits
CAS# 109-02-4 is listed on Canada's DSL List.
CAS# 109-02-4 is listed on Canada's Ingredient Disclosure List.
CAS# 109-02-4: OEL-RUSSIA:STEL 5 mg/m3;Skin
OEL-SWEDEN:TWA 5 ppm (20 mg/m3);STEL 10 ppm (40 mg/m3);Skin
CAS# 109-02-4 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION