shandong xiya chemical technol...Purity: 98%Lead Time: -
Zhu Hai Shuangbojie Tech.LTD.CPurity: 99%Lead Time: 3 Day
Chongqing Sipunasi Technology...Purity: 99%Lead Time: 7 Day
Shanghai Fuxin Pharmaceutical ...Purity: 99%Lead Time: 7 Day
Changzhou Extraordinary Pharma...Purity: 99%Lead Time: 3 Day
|Name:||3-Hydroxypyridine 98% Material Safety Data Sheet|
|Synonym:||3-Pyridinol; 3-Pyridol; beta-Hydroxypyridine; Pyridin-3-ol; Pyridine, 3-hydroxy-|
Synonym:3-Pyridinol; 3-Pyridol; beta-Hydroxypyridine; Pyridin-3-ol; Pyridine, 3-hydroxy-
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 36/37/38
Section 3 - HAZARDS IDENTIFICATION
Irritating to eyes, respiratory system and skin.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Causes eye irritation.
Causes skin irritation. May be harmful if absorbed through the skin.
The toxicological properties of this material have not been fully investigated.
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. May be harmful if swallowed.
Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. May be harmful if inhaled.
Chronic inhalation and ingestion may cause effects similar to those of acute inhalation and ingestion. Exposures to doses of pyridine that are too low to produce overt clinical symptoms can cause liver damage and repeated low-level exposures can cause cirrhosis. Feeding studies in rats produced blood effects like changes in clotting factors. Hazards associated with pyridine may be seen in this product.
Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid.
In case of contact, flush skin with plenty of water. Remove contaminated clothing and shoes. Get medical aid if irritation develops and persists. Wash clothing before reuse.
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Section 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. This material in sufficient quantity and reduced particle size is capable of creating a dust explosion.
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions. Provide ventilation.
Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Avoid breathing dust.
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 109-00-2: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Wear appropriate protective gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Crystalline powder
Color: beige to brown
Odor: None reported.
pH: 6 - 6.5 (3% aq soln)
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 180 deg C @ 22 mm Hg
Freezing/Melting Point: 125 - 130 deg C
Autoignition Temperature: 500 deg C ( 932.00 deg F)
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: 33 g/L (20C)
Specific Gravity/Density: Not available.
Molecular Formula: C5H5NO
Molecular Weight: 95.10
Section 10 - STABILITY AND REACTIVITY
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, strong bases, acid chlorides, heavy metal salts.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, cyanide fumes.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
CAS# 109-00-2: UU7701400 LD50/LC50:
3-Hydroxypyridine - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Section 15 - REGULATORY INFORMATION
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
R 36/37/38 Irritating to eyes, respiratory system
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/39 Wear suitable protective clothing and
WGK (Water Danger/Protection)
CAS# 109-00-2: No information available.
CAS# 109-00-2 is listed on Canada's NDSL List.
CAS# 109-00-2 is not listed on Canada's Ingredient Disclosure List.
CAS# 109-00-2 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION