Recommended Suppliersmore
isoamyl butyrate
CAS No.: 106-27-4
Synonyms:
Formula: C9H18O2
Exact Mass: 158.13100
Molecular Weight: 158.23800
PSA: 26.30000
LogP: 2.37580
Reference Price: $3,710/ton Inquiry Now
isoamyl butyrate 106-27-4 MSDS
Name: Isoamylbutyrate 99+ % Material Safety Data Sheet
Synonym: Butanoic acid, 3-methylbutyl ester; Isoamyl butanoate; Isoamyl butylate; Isoamyl-n-butyrate; Isopentyl butanoate; Isopenyl butyrate; 3-Methylbutyl butyrat
CAS: 106-27-4
Section 1 - Chemical Product   MSDS Name:Isoamylbutyrate 99+ % Material Safety Data Sheet
Synonym:Butanoic acid, 3-methylbutyl ester; Isoamyl butanoate; Isoamyl butylate; Isoamyl-n-butyrate; Isopentyl butanoate; Isopenyl butyrate; 3-Methylbutyl butyrat

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
106-27-4 Isoamyl butyrate 99+ 203-380-8
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
May cause chemical conjunctivitis and corneal damage.
Skin:
May cause moderate skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. Ingestion of large amounts may cause CNS depression.
Inhalation:
May cause respiratory tract irritation. May cause irritation of the mucous membranes. Inhalation at high concentrations may cause CNS depression and asphixiation.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
  Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Flammable liquid and vapor. Containers may explode when heated.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. For large fires, use water spray, fog or alcohol-resistant foam. Do NOT use straight streams of water.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Absorb spill using an absorbent, non-combustible material such as earth, sand, or vermiculite. Do not use combustible materials such as sawdust. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.

Section 7 - HANDLING and STORAGE
  Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Flammables-area.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local explosion-proof ventilation to keep airborne levels to acceptable levels.
Exposure Limits CAS# 106-27-4: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use. Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Clear liquid
Color: clear, colorless
Odor: fruity odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 179 deg C @ 760.00mm Hg
Freezing/Melting Point: -73 deg C
Autoignition Temperature: Not applicable.
Flash Point: 57 deg C ( 134.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: slightly soluble
Specific Gravity/Density: .8660g/cm3
Molecular Formula: C9H18O2
Molecular Weight: 158.23

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 106-27-4: ET5034000 LD50/LC50:
CAS# 106-27-4: Draize test, rabbit, skin: 500 mg/24H Moderate; Oral, rat: LD50 = >5 gm/kg; Skin, rabbit: LD50 = >5 gm/kg.
Oral, rat: LD50 > 5gm/kg. Skin, rabbit: LD50 > 5 Carcinogenicity:
Isoamyl butyrate - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
  Other No information available.

Section 13 - DISPOSAL CONSIDERATIONS
  Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION
 
IATA
Shipping Name: AMYL BUTYRATES
Hazard Class: 3
UN Number: 2620
Packing Group: III
IMO
Shipping Name: AMYL BUTYRATES
Hazard Class: 3.3
UN Number: 2620
Packing Group: III
RID/ADR
Shipping Name: AMYL BUTYRATES
Hazard Class: 3
UN Number: 2620
Packing group: III

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 106-27-4: No information available.
Canada
CAS# 106-27-4 is listed on Canada's DSL List.
CAS# 106-27-4 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 106-27-4 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220