Recommended Suppliersmore
2,4-Dimethylphenol 105-67-9 MSDS
Name: 2 4-Dimethylphenol 99% (GC) Material Safety Data Sheet
Synonym: 2,4-Xylenol; 4,6-DImethylphenol Benzene; 1-Hydroxy-2,4-Dimethyl Benzene; M-Xylenol
CAS: 105-67-9
Section 1 - Chemical Product   MSDS Name:2 4-Dimethylphenol 99% (GC) Material Safety Data Sheet
Synonym:2,4-Xylenol; 4,6-DImethylphenol Benzene; 1-Hydroxy-2,4-Dimethyl Benzene; M-Xylenol

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
105-67-9 2,4-Dimethylphenol 99% 203-321-6
Hazard Symbols: XN
Risk Phrases: 21/22

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Harmful in contact with skin and if swallowed.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May cause kidney damage.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Chronic ingestion may cause effects similar to those of acute ingestion. May cause kidney damage.

Section 4 - FIRST AID MEASURES
  Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Material will burn in a fire. Use water spray to keep fire-exposed containers cool. May polymerize explosively when involved in a fire. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated.
Extinguishing Media:
Do NOT get water inside containers. For small fires, use dry chemical, carbon dioxide, or water spray. For large fires, use dry chemical, carbon dioxide, alcohol-resistant foam, or water spray.
Cool containers with flooding quantities of water until well after fire is out.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

Section 7 - HANDLING and STORAGE
  Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Keep away from strong bases and metals.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Do not store in metal containers.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 105-67-9: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Crystals
Color: colorless or almost colorless
Odor: Characteristic phenolic odor.
pH: Not available.
Vapor Pressure: 10 mm Hg @92.3
Viscosity: Not available.
Boiling Point: 211 deg C
Freezing/Melting Point: 25.4-26C
Autoignition Temperature: Not available.
Flash Point: 96 deg C ( 204.80 deg F)
Explosion Limits, lower: 1.40 vol %
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 0.5% (25C)
Specific Gravity/Density: .9700g/cm3
Molecular Formula: C8H10O
Molecular Weight: 122.17

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, excess heat.
Incompatibilities with Other Materials:
Bases - acid chlorides - acid anhydrides - oxidizing agents - corrodes steel - brass - copper - copper alloys.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 105-67-9: ZE5600000 LD50/LC50:
CAS# 105-67-9: Oral, mouse: LD50 = 809 mg/kg; Oral, rat: LD50 = 3200 mg/kg; Skin, rat: LD50 = 1040 mg/kg.
Carcinogenicity:
2,4-Dimethylphenol - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
  Ecotoxicity:
cfr. DOSE

Section 13 - DISPOSAL CONSIDERATIONS
  Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION
 
IATA
Shipping Name: XYLENOLS
Hazard Class: 6.1
UN Number: 2261
Packing Group: II
IMO
Shipping Name: XYLENOLS, LIQUID
Hazard Class: 6.1
UN Number: 2261
Packing Group: II
RID/ADR
Shipping Name: XYLENOLS
Hazard Class: 6.1
UN Number: 2261
Packing group: II
USA RQ: CAS# 105-67-9: 100 lb final RQ; 45.4 kg final RQ

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 21/22 Harmful in contact with skin and if
swallowed.
Safety Phrases:
S 2 Keep out of reach of children.
S 28A After contact with skin, wash immediately with
plenty of water.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 105-67-9: No information available.
Canada
CAS# 105-67-9 is listed on Canada's DSL List.
CAS# 105-67-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 105-67-9 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220