Elsa Biotechnology Co.,Ltd.Purity: 95%Lead Time: 2 Day
Jiangsu Yonghua Fine Chemical ...Purity: 99%Lead Time: 1 Day
Chongqing Sipunasi Technology...Purity: 99%Lead Time: 7 Day
nan jing dao si fu sheng wu ke...Purity: 99%Lead Time: 1 Day
Zhejiang Chemsyn Pharm Co., Lt...Purity: 98%Lead Time: 14 Day
|Name:||Acetanilide Material Safety Data Sheet|
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 22
Section 3 - HAZARDS IDENTIFICATION
Harmful if swallowed.
Potential Health Effects
Dust may cause mechanical irritation.
May cause skin irritation. May cause skin sensitization, an allergic reaction, which becomes evident upon re-exposure to this material.
Harmful if swallowed. May cause irritation of the digestive tract.
May cause kidney damage. May cause methemoglobinemia, cyanosis (bluish discoloration of skin due to deficient oxygenation of the blood), convulsions, and death. Human systemic effects by ingestion may include: visual field changes, tinnitus, and nausea or vomiting.
May cause respiratory tract irritation. May cause methemoglobinemia, cyanosis (bluish discoloration of skin due to deficient oxygenation of the blood), convulsions, tachycardia, dyspnea (labored breathing), and death. May cause effects similar to those described for ingestion.
Chronic exposure may cause effects similar to those of acute exposure.
Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Get medical aid. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Call a poison control center. If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:
Antidote: None reported.
Section 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Will burn if involved in a fire. Dust can be an explosion hazard when exposed to heat or flame. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
For small fires, use water spray, dry chemical, carbon dioxide or chemical foam. Use water spray to cool fire-exposed containers.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.
Keep away from heat and flame. Store in a tightly closed container.
Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep away from strong bases.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local explosion-proof ventilation to keep airborne levels to acceptable levels.
Exposure Limits CAS# 103-84-4: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Wear appropriate gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: white glistening crystals.
Odor: Not available.
pH: Not available.
Vapor Pressure: 1 mm Hg @237 deg F
Viscosity: Not available.
Boiling Point: 304 deg C @ 760 mm Hg
Freezing/Melting Point: 113 - 115 deg C
Autoignition Temperature: 545 deg C ( 1,013.00 deg F)
Flash Point: 173 deg C ( 343.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Solubility in water: Slightly soluble.
Specific Gravity/Density: 1.21
Molecular Formula: C8H9NO
Molecular Weight: 135.17
Section 10 - STABILITY AND REACTIVITY
Conditions to Avoid:
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
CAS# 103-84-4: AD7350000 LD50/LC50:
CAS# 103-84-4: Oral, mouse: LD50 = 1210 mg/kg; Oral, rat: LD50 = 800 mg/kg.
Acetanilide - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Fish: Bluegill/Sunfish: LC50 = 100 mg/L; 96 Hr.; Static, 23 degrees C
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Section 15 - REGULATORY INFORMATION
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
R 22 Harmful if swallowed.
WGK (Water Danger/Protection)
CAS# 103-84-4: 1
CAS# 103-84-4 is listed on Canada's DSL List.
CAS# 103-84-4 is not listed on Canada's Ingredient Disclosure List.
CAS# 103-84-4 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION