Hangzhou DayangChem Co., LtdPurity: 98%Lead Time: 7 Day
Shanghai Send Pharmaceutical T...Purity: 98%Lead Time: 14 Day
Henan Tianfu Chemical Co.,LtdPurity: 98%Lead Time: 7 Day
Hangzhou Sage Chemical Co.,Ltd...Purity: 98%Lead Time: 7 Day
shang hai hong sheng wu yi ya...Purity: 98+%Lead Time: 2 Day
Regulation (EC) No 1907/2006
1 - Product and Company Information
Product Name 5-METHYLINDOLE-2-CARBOXYLIC AC - 250MG
2 - Hazards Identification
3 - Composition/Information on Ingredients
Product Name CAS # EC no Annex I
5-METHYLINDOLE-2-CARBOXYLIC ACID 10241-97-1 None None
Molecular Weight 175,1900 AMU
4 - First Aid Measures
If inhaled, remove to fresh air. If breathing becomes difficult,
call a physician.
AFTER SKIN CONTACT
In case of skin contact, flush with copious amounts of water for
at least 15 minutes. Remove contaminated clothing and shoes.
Call a physician.
AFTER EYE CONTACT
In case of contact with eyes, flush with copious amounts of
water for at least 15 minutes. Assure adequate flushing by
separating the eyelids with fingers. Call a physician.
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.
5 - Fire Fighting Measures
Suitable: Water spray. Carbon dioxide, dry chemical powder, or
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.
6 - Accidental Release Measures
PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear protective equipment.
METHODS FOR CLEANING UP
Sweep up, place in a bag and hold for waste disposal. Avoid
raising dust. Ventilate area and wash spill site after material
pickup is complete.
7 - Handling and Storage
8 - Exposure Controls / Personal Protection
Mechanical exhaust required.
PERSONAL PROTECTIVE EQUIPMENT
Special Protective Measures: Wear appropriate government approved
respirator, chemical-resistant gloves, safety goggles, other
9 - Physical and Chemical Properties
BP/BP Range N/A
MP/MP Range 234,000. - 235,000 °
Flash Point N/A
Autoignition Temp N/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion Limits N/A
Vapor Pressure N/A
Partition Coefficient N/A
Vapor Density N/A
Saturated Vapor Conc. N/A
Evaporation Rate N/A
Bulk Density N/A
Decomposition Temp. N/A
Solvent Content N/A
Water Content N/A
Surface Tension N/A
Miscellaneous Data N/A
10 - Stability and Reactivity
Hazardous Polymerization: Will not occur
11 - Toxicological Information
ROUTE OF EXPOSURE
Multiple Routes: May cause irritation. May be harmful by
inhalation, ingestion, or skin absorption.
CONDITIONS AGGRAVATED BY EXPOSURE
The toxicological properties have not been thoroughly
12 - Ecological Information
No data available.
13 - Disposal Considerations
Dissolve or mix the material with a combustible solvent and burn
in a chemical incinerator equipped with an afterburner and
scrubber. Observe all federal, state, and local environmental
14 - Transport Information
Non-hazardous for road transport.
Non-hazardous for sea transport.
Non-hazardous for air transport.
15 - Regulatory Information
Caution: Substance not yet fully tested (EU).
COUNTRY SPECIFIC INFORMATION
16 - Other Information
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
For R&D use only. Not for drug, household or other uses.
SECTION 16 - ADDITIONAL INFORMATION