Jiangsu Yonghua Fine Chemical ...Purity: 100%Lead Time: 1 Day
ying kou tian yuan hua gong ya...Purity: 98.5%Lead Time: 14 Day
Jiaxing fine chemical LTDPurity: 98%Lead Time: 14 Day
Yixing Weite Petrochemical Add...Purity: 95%Lead Time: 14 Day
YiXing LIAN YANG CHEMICAL FACT...Purity: 98%Lead Time: 14 Day
|Name:||Ferrocene 98% Material Safety Data Sheet|
|Synonym:||Biscyclopentadienyliron; di-2,4-cyclopentadien-1-yliron; ferrotsen; Bis(cyclopentadiene); Iron Dicyclopentadienyl|
Synonym:Biscyclopentadienyliron; di-2,4-cyclopentadien-1-yliron; ferrotsen; Bis(cyclopentadiene); Iron Dicyclopentadienyl
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 22
Section 3 - HAZARDS IDENTIFICATION
Harmful if swallowed.Heat sensitive.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
May cause eye irritation.
May cause skin irritation.
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. May cause blood abnormalities and hepatic cirrhosis. May cause damage to the red blood cells.
The toxicological properties of this substance have not been fully investigated. Inhalation of dust may cause respiratory tract irritation.
Chronic exposure may cause liver damage.
Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid.
In case of contact, flush skin with plenty of water. Remove contaminated clothing and shoes. Get medical aid if irritation develops and persists. Wash clothing before reuse.
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Antidote: None reported.
Section 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation.
Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 102-54-5: United States OSHA: 15 mg/m3 TWA (total dust); 5 mg/m3 TWA (respirable fraction) Belgium - TWA: 10 mg/m3 VLE France - VME: 10 mg/m3 VME Germany: 5 mg/m3 TWA (inhalable fraction) Malaysia: 10 mg/m3 TWA Netherlands: 10 mg/m3 MAC Spain: 10 mg/m3 VLA-ED Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Wear appropriate gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Crystalline powder
pH: Not available.
Vapor Pressure: 0.05 mbar @ 40
Viscosity: Not available.
Boiling Point: 249 deg C @ 760.00mm Hg
Freezing/Melting Point: 173.0 - 176.0 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: >465 deg C
Solubility in water: Insoluble.
Molecular Formula: C10H10Fe
Molecular Weight: 186.04
Section 10 - STABILITY AND REACTIVITY
Stable under normal temperatures and pressures. Heat sensitive Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, tetranitromethane, ammonium perchlorate, mercuric nitrate.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
CAS# 102-54-5: LK0700000 LD50/LC50:
CAS# 102-54-5: Oral, mouse: LD50 = 832 mg/kg; Oral, rat: LD50 = 1320 mg/kg.
Ferrocene - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Shipping Name: Not regulated.
Section 15 - REGULATORY INFORMATION
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
R 22 Harmful if swallowed.
WGK (Water Danger/Protection)
CAS# 102-54-5: No information available.
CAS# 102-54-5 is listed on Canada's DSL List.
CAS# 102-54-5 is listed on Canada's Ingredient Disclosure List.
CAS# 102-54-5 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION