Recommended Suppliersmore
Phenylacetic acid isobutyl ester 102-13-6 MSDS

Section I.Chemical Product and Company Identification
    Chemical Name Phenylacetic Acid Isobutyl Ester
    Portland OR
    Synonym        Iso-butyl Phenylacetate    
    Chemical Formula        C6H5CH2COOCH2CH(CH3)2    
    CAS Number        102-13-6    

Section II.        Composition and Information on Ingredients    
    Chemical Name        CAS Number Percent (%)        TLV/PEL        Toxicology Data    
    Phenylacetic Acid Isobutyl Ester        102-13-6        Min. 99.0 Not available.        Not available.    
    (GC)

Section III. Hazards Identification
    Acute Health Effects        Harmful if ingested or inhaled. Minimize exposure to this material. Severe overexposure can result in injury or death.    
    Irritating to eyes and skin on contact. Inhalation causes irritation of the lungs and respiratory system. Inflammation of the
    eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening,
    or, occasionally, blistering. Follow safe industrial hygiene practices and always wear proper protective equipment when
    handling this compound.
    Chronic Health Effects        CARCINOGENIC EFFECTS : Not available.    
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    Toxicity to the reproductive system: Not available.
    There is no known effect from chronic exposure to this product. Repeated or prolonged exposure to this compound is
    not known to aggravate existing medical conditions.

Section IV.        First Aid Measures    
    Eye Contact        Check for and remove any contact lenses. IMMEDIATELY flush eyes with running water for at least 15 minutes, keeping    
    eyelids open. COLD water may be used. DO NOT use an eye oitment. Seek medical attention. Treat symptomatically
    and supportively.
    Skin Contact        After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contamintated skin with    
    running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. COLD water
    may be used. Cover the irritated skin with an emollient. Seek medical attention. Treat symptomatically and supportively.
    Wash any contaminated clothing before reusing.
    Inhalation        If the victim is not breathing, perform artificial respiration. Loosen tight clothing such as a collar, tie, belt or waistband. If    
    breathing is difficult, oxygen can be administered. Seek medical attention. Treat symptomatically and supportively.
    Ingestion        INDUCE VOMITING by sticking finger in throat. Lower the head so that the vomit will not reenter the mouth and throat.    
    Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, administer artificial respiration.
    Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the toxic material
    was ingested; the absensce of such signs, however, is not conclusive. Seek immediate medical attention and, if possible,
    show the chemical label. Treat symptomatically and supportively.

Section V.        Fire and Explosion Data    
    Not available.
    Auto-Ignition
    Flammability        May be combustible at high    
    temperatures.
    Flash Points        Flammable Limits    
    >110°C (231.8°F)        Not available.    
    Combustion Products        These products are toxic carbon oxides (CO, CO 2).    
    Fire Hazards
    No specific information is available regarding the flammability of this compound in the presence of various materials.
    Explosion Hazards        Risks of explosion of the product in presence of mechanical impact: Not available.    
    Risks of explosion of the product in presence of static discharge: Not available.
    No additional information is available regarding the risks of explosion.
    Continued on Next Page
    102-13-6erNINGS(International)de
    Fire Fighting Media
    SMALL FIRE: Use DRY chemicals, CO 2, water spray or foam.
    and Instructions        LARGE FIRE: Use water spray, fog or foam. DO NOT use water jet.    

Section VI.        Accidental Release Measures    
    Spill Cleanup        Harmful material. Irritating material.    
    Instructions        Keep away from heat and sources of ignition. Mechanical exhaust required. Stop leak if without risk. Finish cleaning the    
    spill by rinsing any contaminated surfaces with copious amounts of water. Consult federal, state, and/or local authorities
    for assistance on disposal.

Section VII. Handling and Storage
    Handling and Storage        HARMFUL. IRRITANT. Keep away from heat and sources of ignition. Mechanical exhaust required. When not in use,    
    tightly seal the container and store in a dry, cool place. Avoid excessive heat and light. Do not breathe gas, fumes,
    Information
    vapor or spray.
    Always store away from incompatible compounds such as oxidizing agents, alkalis (bases).

Section VIII. Exposure Controls/Personal Protection
    Engineering Controls        Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their    
    respective threshold limit value. Ensure that eyewash station and safety shower is proximal to the work-station location.
    Personal Protection        Splash goggles. Lab coat. Dust respirator. Boots. Gloves. A MSHA/NIOSH approved respirator must be used to avoid    
    inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling
    this product.
    Exposure Limits        Not available.    

Section IX. Physical and Chemical Properties
    Physical state @ 20°C        Liquid.        Solubility    
    Not available.
    0.986
    Specific Gravity
    Molecular Weight        192.25        Partition Coefficient    
    Not available.
    Boiling Point        253°C (487.4°F)        Vapor Pressure        Not available.    
    Melting Point        Not available.        Vapor Density        Not available.    
    Not available.        Not available.    
    Refractive Index        Volatility    
    Critical Temperature        Not available.        Odor        Not available.    
    Viscosity        Not available.        Taste        Not available.    

Section X.        Stability and Reactivity Data    
    Stability    
This material is stable if stored under proper conditions. (See Section VII for instructions)    
    Conditions of Instability
    Avoid excessive heat and light.
    Incompatibilities
    Reactive with strong oxidizing agents, strong alkalis (bases).

Section XI. Toxicological Information
    RTECS Number        Not available.    
    Routes of Exposure        Eye contact. Ingestion. Inhalation. Skin contact.    
    Not available.
    Toxicity Data
    CARCINOGENIC EFFECTS : Not available.
    Chronic Toxic Effects
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    Toxicity to the reproductive system: Not available.
    There is no known effect from chronic exposure to this product. Repeated or prolonged exposure to this compound is not
    known to aggravate existing medical conditions.
    Acute Toxic Effects        Harmful if ingested or inhaled. Minimize exposure to this material. Severe overexposure can result in injury or death.    
    Irritating to eyes and skin on contact. Inhalation causes irritation of the lungs and respiratory system. Inflammation of the
    eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening,
    or, occasionally, blistering. Follow safe industrial hygiene practices and always wear proper protective equipment when
    handling this compound.
    Continued on Next Page
    Phenylacetic Acid Isobutyl Ester

Section XII.        Ecological Information    
    Ecotoxicity        Not available.    
    Environmental Fate        Not available.    

Section XIII. Disposal Considerations
    Recycle to process, if possible. Consult your local or regional authorities. You may be able to dissolve or mix material with
    Waste Disposal
    a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all
    federal, state, and local regulations when disposing of this substance.

Section XIV. Transport Information
    DOT Classification        Not a DOT controlled material (United States).    
    PIN Number        Not applicable.    
    Proper Shipping Name
    Not applicable.
    Packing Group (PG)        Not applicable.    
    DOT Pictograms

Section XV. Other Regulatory Information and Pictograms
    TSCA Chemical Inventory        This product is ON the EPA Toxic Substances Control Act (TSCA) inventory.    
    (EPA)
    WHMIS Classification
    Not available.
    (Canada)
    EINECS Number (EEC) Not available.
    EEC Risk Statements        R20/21/22- Harmful by inhalation, in contact with skin and if swallowed.    
    R36/37/38- Irritating to eyes, respiratory system and skin.
    Japanese Regulatory Data


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220