copper(II) chloride dihydrate 10125-13-0 MSDS
Name: Copper (II) Chloride Dihydrate Material Safety Data Sheet
Synonym: Cupric Chloride; Copper Oxychloride
CAS: 10125-13-0
Section 1 - Chemical Product   MSDS Name:Copper (II) Chloride Dihydrate Material Safety Data Sheet
Synonym:Cupric Chloride; Copper Oxychloride

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
10125-13-0 Copper (II) Chloride Dihydrate 100 unlisted
Hazard Symbols: XN
Risk Phrases: 22 36/37/38

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Harmful if swallowed. Irritating to eyes, respiratory system and skin.Hygroscopic (absorbs moisture from the air).The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
Causes eye irritation. Exposure to particulates or solution may cause conjunctivitis, ulceration, and corneal abnormalities.
Contact with the eyes may cause corneal damage. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. May cause skin sensitization, an allergic reaction, which becomes evident upon re-exposure to this material.
May cause irritation with burning pain, itching and redness.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May cause hemorrhaging of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
Causes respiratory tract irritation. May cause ulceration and perforation of the nasal septum if inhaled in excessive quantities.
Inhalation of fumes may cause metal fume fever, which is characterized by flu-like symptoms with metallic taste, fever, chills, cough, weakness, chest pain, muscle pain and increased white blood cell count. The toxicological properties of this substance have not been fully investigated. May be harmful if inhaled. Can produce delayed pulmonary edema.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Effects may be delayed. Individuals with Wilson's disease are unable to metabolize copper. Thus, copper accumulates in various tissues and may result in liver, kidney, and brain damage.

Section 4 - FIRST AID MEASURES
  Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively.
Antidote: The use of d-Penicillamine as a chelating agent should be determined by qualified medical personnel.

Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Wear appropriate protective clothing to prevent contact with skin and eyes. Wear a self-contained breathing apparatus (SCBA) to prevent contact with thermal decomposition products. Use extinguishing media appropriate to the surrounding fire. Substance is noncombustible.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to extinguish surrounding fire.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

Section 7 - HANDLING and STORAGE
  Handling:
Wash thoroughly after handling. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation. Wash clothing before reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 10125-13-0: United Kingdom, WEL - TWA: (listed as copper): 0.2 mg/m3 TWA (fum 1 mg/m3 TWA (dust and mist) United Kingdom, WEL - STEL: (listed as copper): 0.6 mg/m3 STEL (fume); 2 mg/m3 STEL (dust and mist) United States OSHA: 0.1 mg/m3 TWA (fume); 1 mg/m3 TWA (dusts and mists) (listed under Copper).
Belgium - TWA: (listed as copper): 0.2 mg/m3 VLE (fume); 1 mg/m3 (dust and mist) France - VME: (listed as copper): 0.2 mg/m3 VME (fume); 1 mg/m3 V (dust, as Cu) France - VLE: (listed as copper): 2 mg/m3 VLE (dust, as Cu) Germany: (listed as copper): 0.2 mg/m3 VME (fume); 1 mg/m3 VME (d as Cu) Malaysia: (listed as copper): 0.2 mg/m3 TWA (fume, as Cu); 1 mg/m TWA (dust and mist, as Cu) Netherlands: (listed as copper): 0.2 mg/m3 MAC (smoke); 1 mg/m3 M (dust) Russia: (listed as copper): 1 mg/m3 TWA (dust) Russia: (listed as copper): 0.5 mg/m3 STEL (dust) Spain: (listed as copper): 0.2 mg/m3 VLA-ED (fume); 1 mg/m3 VLA-E (dust and mist, as Cu) Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Solid
Color: green
Odor: odorless
pH: 3.6 for 0.2 M soln.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 1819 deg F
Freezing/Melting Point: 212 deg F
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 1819 deg F
Solubility in water: 1150 g/l (5% aq.sol.) in water.
Specific Gravity/Density: 2.54 (water=1)
Molecular Formula: CuCl2.2H2O
Molecular Weight: 170.4788

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, acids, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Hydrogen chloride, irritating and toxic fumes and gases, chloride fumes.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 10125-13-0: GL7030000 LD50/LC50:
Not available.
Carcinogenicity:
Copper (II) Chloride Dihydrate - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
 

Section 13 - DISPOSAL CONSIDERATIONS
  Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.

Section 14 - TRANSPORT INFORMATION
 
IATA
Shipping Name: Copper chloride
Hazard Class: 8
UN Number: 2802
Packing Group: III
IMO
Shipping Name: COPPER CHLORIDE
Hazard Class: 8
UN Number: 2802
Packing Group: III
RID/ADR
Shipping Name: COPPER CHLORIDE
Hazard Class: 8
UN Number: 2802
Packing group: III

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 20 When using do not eat or drink.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 10125-13-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 10125-13-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 10125-13-0 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220