Recommended Suppliersmore
3-Methoxydiphenylamine
CAS No.: 101-16-6
Synonyms:
Formula: C13H13NO
Exact Mass: 199.10000
Molecular Weight: 199.24800
PSA: 21.26000
LogP: 3.51180
Reference Price: $307/kg Inquiry Now
3-Methoxydiphenylamine 101-16-6 MSDS

Section I.Chemical Product and Company Identification
    Chemical Name 3-Methoxydiphenylamine
    Portland OR
    Synonym        Not available.    
    Chemical Formula        CH3OC6H4NHC6H5    
    CAS Number        101-16-6    

Section II.        Composition and Information on Ingredients    
    Chemical Name        CAS Number Percent (%)        TLV/PEL        Toxicology Data    
    3-Methoxydiphenylamine        101-16-6        Min. 97.0 Not available.        Not available.    
    (GC,T)

Section III. Hazards Identification
    Acute Health Effects        Irritating to eyes and skin on contact. Inhalation causes irritation of the lungs and respiratory system. Inflammation of the    
    eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening,
    or, occasionally, blistering. Follow safe industrial hygiene practices and always wear proper protective equipment when
    handling this compound.
    CARCINOGENIC EFFECTS : Not available.
    Chronic Health Effects
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    DEVELOPMENTAL TOXICITY: Not available.
    Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.

Section IV.        First Aid Measures    
    Eye Contact        Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15    
    minutes. Get medical attention.
    Skin Contact
    In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing
    before reuse. Thoroughly clean shoes before reuse. Get medical attention.
    If the victim is not breathing, perform mouth-to-mouth resuscitation. Loosen tight clothing such as a collar, tie, belt or
    Inhalation
    waistband. If breathing is difficult, oxygen can be administered. Seek medical attention if respiration problems do not
    improve.
    Ingestion        INDUCE VOMITING by sticking finger in throat. Lower the head so that the vomit will not reenter the mouth and throat.    
    Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth
    resuscitation. Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the
    toxic material was ingested; the absence of such signs, however, is not conclusive. SEEK IMMEDIATE MEDICAL
    ATTENTION in case of ingestion of a radioactive material.

Section V.        Fire and Explosion Data    
    Not available.
    Flammability        May be combustible at high temperature.        Auto-Ignition    
    Flash Points        Flammable Limits        Not available.    
    Not available.
    Combustion Products
    These products are toxic carbon oxides (CO, CO 2), nitrogen oxides (NO, NO2).
    Fire Hazards
    Not available.
    Explosion Hazards        Risks of explosion of the product in presence of mechanical impact: Not available.    
    Risks of explosion of the product in presence of static discharge: Not available.
    Fire Fighting Media
    SMALL FIRE: Use DRY chemical powder.
    LARGE FIRE: Use water spray, fog or foam. DO NOT use water jet.
    and Instructions
    Consult with local fire authorities before attempting large scale fire-fighting operations.
    Continued on Next Page
    3-Methoxydiphenylamine

Section VI.        Accidental Release Measures    
    Spill Cleanup        Irritating material.    
    Instructions        Use a shovel to put the material into a convenient waste disposal container. Finish cleaning the spill by rinsing any    
    contaminated surfaces with copious amounts of water.

Section VII. Handling and Storage
    Handling and Storage        IRRITANT. Keep away from heat. Mechanical exhaust required. When not in use, tightly seal the container and store in    
    a dry, cool place. Avoid excessive heat and light. Do not breathe dust.
    Information
    Always store away from incompatible compounds such as oxidizing agents.

Section VIII. Exposure Controls/Personal Protection
    Engineering Controls        Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below    
    recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to
    airborne contaminants below the exposure limit.
    Personal Protection        Splash goggles. Lab coat. Dust respirator. Boots. Gloves. Suggested protective clothing might not be sufficient; consult    
    a specialist BEFORE handling this product. Be sure to use a MSHA/NIOSH approved respirator or equivalent.
    Exposure Limits        Not available.    

Section IX. Physical and Chemical Properties
    Solid. (White to brown crystalline        Solubility    
    Physical state @ 20°C        Not available.    
    powder.)
    Not available.
    Specific Gravity
    Molecular Weight        Partition Coefficient    
    199.25        Not available.    
    Boiling Point        Vapor Pressure    
    Not available.        Not applicable.    
    Melting Point        72 to 74°C (161.6 to 165.2°F)        Vapor Density        Not available.    
    Refractive Index        Not available.        Volatility        Not available.    
    Critical Temperature        Not available.        Odor        Not available.    
    Viscosity        Not available.        Taste        Not available.    

Section X.        Stability and Reactivity Data    
    Stability    
This material is stable if stored under proper conditions. (See Section VII for instructions)    
    Conditions of Instability        Avoid excessive heat and light.    
    Incompatibilities
    Reactive with strong oxidizing agents.

Section XI. Toxicological Information
    RTECS Number        Not available.    
    Routes of Exposure        Eye Contact. Ingestion. inhalation.    
    Toxicity Data        Not available.    
    CARCINOGENIC EFFECTS : Not available.
    Chronic Toxic Effects
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    DEVELOPMENTAL TOXICITY: Not available.
    Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.
    Acute Toxic Effects        Irritating to eyes and skin on contact. Inhalation causes irritation of the lungs and respiratory system. Inflammation of the    
    eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening,
    or, occasionally, blistering. Follow safe industrial hygiene practices and always wear proper protective equipment when
    handling this compound.
    Continued on Next Page
    3-Methoxydiphenylamine

Section XII.        Ecological Information    
    Ecotoxicity        Not available.    
    Environmental Fate        Not available.    

Section XIII. Disposal Considerations
    Recycle to process, if possible. Consult your local regional authorities. You may be able to dissove or mix material with a
    Waste Disposal
    combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all
    federal, state and locl regulations when disposing of the substance.

Section XIV. Transport Information
    DOT Classification        Not a DOT controlled material (United States).    
    PIN Number        Not applicable.    
    Proper Shipping Name
    Not applicable.
    Packing Group (PG)        Not applicable.    
    DOT Pictograms

Section XV. Other Regulatory Information and Pictograms
    TSCA Chemical Inventory        This product is NOT on the EPA Toxic Substances Control Act (TSCA) inventory. The following notices are required by 40    
    CFR 720.36 (C) for those products not on the inventory list:
    (EPA)
    (i) These products are supplied solely for use in research and development by or under the supervision of a technically
    qualified individual as defined in 40 CFR 720.0 et sec.
    (ii) The health risks of these products have not been fully determined. Any information that is or becomes available will be
    supplied on an MSDS sheet.
    WHMIS Classification        Not available.    
    (Canada)
    EINECS Number (EEC) 202-921-5
    EEC Risk Statements        R36/37/38- Irritating to eyes, respiratory system and skin.    


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220