Stannic chloride pentahydrate
CAS No.: 10026-06-9
Synonyms:
Formula: Cl4H10O5Sn
Exact Mass: 349.83000
Molecular Weight: 350.58900
PSA: 46.15000
LogP: 2.05570
Stannic chloride pentahydrate 10026-06-9 MSDS

Section 1: Product Identification
   Chemical Name:       Tin (IV) chloride pentahydrate, 98%    
   CAS Registry Number:       10026-06-9    
   Formula:       SnCl4.5H2O    
   EINECS Number:       231-588-9    
   Chemical Family:       metal halide    
   Synonym:       Stannic chloride pentahydrate, Tetrachlorostannane pentahydrate, Tin tetrachloride dihydrate    

Section 2: Composition and Information on Ingredients
   Ingredient       CAS Number       Percent       ACGIH (TWA)       OSHA (PEL)    
   Title Compound       10026-06-9       100%       2mg/m3       2mg/m3    

Section 3: Hazards Identification
   Emergency Overview:       May be harmful by inhalation. Corrosive to skin and eyes.    
   Primary Routes of Exposure:       Contact with skin and eyes. Inhalation of dust.    
   Eye Contact:       Corrosive to the eyes.    
   Skin Contact:       Causes burns to the skin.    
   May be harmful by inhalation. Forms hydrogen chloride when heated. Inhalation can lead to chemical burns to
   Inhalation:
   the respiratory tract.
   Ingestion:       No information is available on the acute physiological effects of ingestion.    
   Corrosive to skin, eyes and respiratory tract and causes eye, skin burns, dyspnea (breathing difficulty), and
   Acute Health Affects:
   pulmonary edema
   Chronic Health Affects:       Prolonged exposure to dust of tin compounds may result in benign pneumoconiosis.    
   NTP:       No    
   IARC:       No    
   OSHA:       No    

SECTION 4: First Aid Measures
   Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
   Eye Exposure:
   assistance in keeping their eye lids open. Get immediate medical attention.
   Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
   Skin Exposure:
   irritation persists.
   Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
   Inhalation:
   in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
   Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
   Ingestion:
   vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
   Flash Point:       not applicable    
   Autoignition Temperature:       none    
   Explosion Limits:       none    
   Extinguishing Medium:       None. Material is non-flammable.    
   If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure
   Special Fire Fighting Procedures:
   self-contained breathing apparatus and full protective clothing.
   Hazardous Combustion and       If involved in a fire this material may emit toxic fumes of hydrogen chloride.    
   Decomposion Products:
   Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
   To avoid raising dust, small spills may be mixed with diatomaceous earth, sand, vermiculite or other suitable
   Spill and Leak Procedures:
   inert material and swept up.

SECTION 7: Handling and Storage
   Handling and Storage:       Store solid in a tightly sealed container.    

SECTION 8: Exposure Controls and Personal Protection
   Eye Protection:       Always wear approved safety glasses when handling a chemical substance in the laboratory.    
   Skin Protection:       Wear protective clothing and gloves. Consult with glove manufacturer to determine the proper type of glove.    
   Ventilation:       Solid may form a fine dust. If possible, handle the solid in an efficient fume hood.    
   If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators
   Respirator:
   requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
   Ventilation:       Solid may form a fine dust. If possible, handle the solid in an efficient fume hood.    
   Additional Protection:       No additional protection required.    

SECTION 9: Physical and Chemical Properties
   Color and Form:       off-white lumps    
   Molecular Weight:       260.50 (350.61)    
   Melting Point:       no data    
   Boiling Point:       no data    
   Vapor Pressure:       no data    
   Specific Gravity:       no data    
   Odor:       none    
   Solubility in Water:       soluble    

SECTION 10: Stability and Reactivity
   Stability:       air and moisture stable    
   Hazardous Polymerization:       no hazardous polymerization    
   Conditions to Avoid:       none    
   Incompatibility:       active metals    
   Decomposition Products:       water, metal oxychloride, metal oxide, and hydrogen chloride    

SECTION 11: Toxicological Information
   Intraperitoneal (rat); LD50: 120 mg/kg. Intravenous (mouse); LD50: 32 mg/kg. Human Lymphocyte;
   RTECS Data:
   Cytogenetic analysis: 2 mg/L. Human Lymphocyte; Sister chromatid exchange: 2 mg/L.
   Carcinogenic Effects:       no data    
   Mutagenic Effects:       Negative data    
   Tetratogenic Effects:       no data    

SECTION 12: Ecological Information
   Ecological Information:       Harmful to aquatic organisms. May cause long-term adverse effects in the aquatic environment.    

SECTION 13: Disposal Considerations
   Disposal:       Dispose of according to local, state and federal regulations.    

SECTION 14: Transportation
   Shipping Name (CFR):       Stannic chloride, pentahydrate    
   Hazard Class (CFR):       8    
   Additional Hazard Class (CFR):       NA    
   Packaging Group (CFR):       III    
   UN ID Number (CFR):       UN# 2440    
   Shipping Name (IATA):       Stannic chloride, pentahydrate    
   Hazard Class (IATA):       8    
   Additional Hazard Class (IATA):       NA    
   Packaging Group (IATA):       III    
   UN ID Number (IATA):       UN# 2440    

SECTION 15: Regulatory Information
   TSCA:       Not listed in the TSCA inventory.    
   SARA (Title 313):       Title compound not listed.    
   Second Ingredient:       none    


SECTION 16 - ADDITIONAL INFORMATION
N/A

Home   |   Announcement   |   Partners   |   Business Cooperation   |   Suppliers   |   Products    |   About Us   |   Contact Us   |   Privacy Policy   |   Terms & Conditions   |   Legal Statement

Copyright © 2013-2016 MOLBASE All Rights Reserved ICP Shanghai 14014220