Hangzhou J&H Chemical Co., Ltd...Purity: 98%Lead Time: 3 Day
guang dong weng jiang hua xue ...Purity: 98%Lead Time: 7 Day
bei jing hao ke ke ji you xian...Purity: 99.999%Lead Time: 4 Day
SHANGHAI YUANYE BIOLOGICAL TEC...Purity: 99.99%Lead Time: 3 Day
shang hai cheng shao sheng wu ...Purity: 99.99%Lead Time: 7 Day
|Name:||Yttrium Chloride Hydrate Material Safety Data Sheet|
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
|10025-94-2||Yttrium Chloride Hydrate||>99.0||unlisted|
Risk Phrases: None Listed.
Section 3 - HAZARDS IDENTIFICATION
Potential Health Effects
Causes severe eye irritation. Causes redness and pain.
Causes mild skin irritation. Skin absorption not likely.
May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
May cause respiratory tract irritation.
No information found.
Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse.
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Get medical aid if cough or other symptoms appear.
Notes to Physician:
Treat symptomatically and supportively.
Antidote: None reported.
Section 5 - FIRE FIGHTING MEASURES
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Use agent most appropriate to extinguish fire. Cool containers with flooding quantities of water until well after fire is out.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.
Section 7 - HANDLING and STORAGE
Wash thoroughly after handling. Wash hands before eating. Use with adequate ventilation. Avoid breathing dust, vapor, mist, or gas. Do not get on skin or in eyes. Avoid ingestion and inhalation.
Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Wear appropriate protective gloves to prevent skin exposure.
Wear appropriate protective clothing to prevent skin exposure.
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Crystalline Solid
Appearance: white to pale yellow
pH: 4.5 - 5.8
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 100 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Solubility in water: soluble
Specific Gravity/Density: 2.18 @ 32 F
Molecular Formula: Cl3Y.nH2O
Molecular Weight: 195.2649
Section 10 - STABILITY AND REACTIVITY
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, strong bases, strong acids, strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, irritating and toxic fumes and gases, chlorine.
Hazardous Polymerization: Will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
CAS# 10025-94-2: ZG3160000 LD50/LC50:
Yttrium Chloride Hydrate - Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Other No information available.
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
No information available.
No information available.
No information available.
Section 15 - REGULATORY INFORMATION
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
WGK (Water Danger/Protection)
CAS# 10025-94-2: No information available.
United Kingdom Occupational Exposure Limits
CAS# 10025-94-2: OES-United Kingdom, TWA (listed as ** undefined
**): 1 mg/m3 TWA
CAS# 10025-94-2: OES-United Kingdom, STEL (listed as ** undefined
**): 3 mg/m3 STEL
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 10025-94-2 is not listed on Canada's Ingredient Disclosure List.
CAS# 10025-94-2 (listed as ** undefined **): OEL-AUSTRALIA:TWA 1 mg/m3
CAS# 10025-94-2 is not listed on the TSCA inventory.
It is for research and development use only.
SECTION 16 - ADDITIONAL INFORMATION